29/71 Series 2: Freediving Buoy, with an incorporated inner tube, outside valve and PVC/ mesh Cover pouch with a zipper to store your equipment. This buoy builds on 29/71’s constant drive to design and manufacture aesthetically beautiful and well engineered products. It’s perfect for use in open water freediving training and competitions. A great option for freediving trips, freediving camps and freediving courses. Constructed of high-quality PVC with an external diameter of 80cm.

Made from non-slippery PVC material, with 4 carrying handles and two continuous ropes on the top and bottom to help holding you in place during breath ups, A strong stainless steel main D-ring for hanging holding the rope and 4 smaller D-rings on the sides for attaching surface ropes. It has a reinforced bottom with drainage holes and outside valve for quick inflation.

There is a large cover which doubles as a storage holder for additional equipment and water bottles. Its enough to take 2-3 freediver’s equipment while out in the water.

Inside the buoy, there is enough space for over 120 m/426 ft of 10mm and 100m for 12mm thick rope. There are also special drainage holes on the bottom of the buoy to immediately drain the water. This comes in handy so you don’t have to tip over and spill out the rope and everything else inside. And there is a another D-Ring inside to attach your dive rope for added piece of mind.

We have left a large space available on the top cover for you put your logo if you so wish, and we offer a service to print any design onto the Buoy if you so desire.

So if you want a Buoy that can be used for Teaching, Training and Competition Diving look no further.

Included:

Freedive Buoy, Top Bag, inflation valve adapter

Material:
Heavy Duty PVC

Weight:

2.9kg

Freediving Buoy Dimensions:
Width: 80m (widest), Height: 13cm

Max Pessure inflation: 10PSI, 0.7 Bar

Connections:

• 4 Carry Handles

• 4 small D-Rings for surface rope

• 1 Heavy Duty D-Ring for dive rope, Max Load 240kg

• 1 Small D-Ring Inside to attached Dive Rope

The 29/71 Freediving Buoy, designed around the travelling freediver. To go anywhere and in any bag, no matter if your walking to your dive site or packing to travel to the other side of the world. The 29/71 Freediving Buoy packs down so the outer-cover and inner-tube fully collapse and can be place into the top bag, weighing a total of 1kg.

Made from heavy duty 1000 denier PU coated Nylon fabric, which gives superior strength and durability from the day to day use of freediving. Whether you are training, teaching or the constant use in any freediving school.

Our Freediving Buoys are constructed using double and triple stitch methods to ensure the structural integrity of each seam, and most importantly where the guide line is connected to the Buoy. Each Buoy has a double D-Ring for your carabiner to attach, ensuring that the guide line is safe and secure. The inner space is large enough to easily hold 70m of rope, but thankfully with this Buoy the Top Bag has a pouch large enough to put, water bottles, extra masks or snorkels or ones camera. Leaving the inner space to solely accommodate your guide rope, no more searching for masks and snorkels after each dive.

The inner tube has been designed so it can be inflated without a pump, and a dump valve is also attached so one can squeeze out all the air so the tube is as flat as possible for better storage in ones bag.

Last but least a small loop is sewn inside so your rope can be attached securely to the Buoy, giving you the knowledge that rope will disappear into depths by accident.

Included:

Outer Cover, Inner Tube, Top Bag

Material:
Heavy duty 1000 denier PU coated Nylon

Weight:

900g
Freediving Buoy Dimensions:
Width: 75cm (widest), Height: 15cm

Top Bag Dimensions:

Length: 45cm, Width: 36cm

The 29/71 Freediving Buoy, designed around the travelling freediver. To go anywhere and in any bag, no matter if your walking to your dive site or packing to travel to the other side of the world. The 29/71 Freediving Buoy packs down so the outer-cover and inner-tube fully collapse and can be place into the top bag, weighing a total of 1kg.

Made from heavy duty 1000 denier PU coated Nylon fabric, which gives superior strength and durability from the day to day use of freediving. Whether you are training, teaching or the constant use in any freediving school.

Our Freediving Buoys are constructed using double and triple stitch methods to ensure the structural integrity of each seam, and most importantly where the guide line is connected to the Buoy. Each Buoy has a double D-Ring for your carabiner to attach, ensuring that the guide line is safe and secure. The inner space is large enough to easily hold 70m of rope, but thankfully with this Buoy the Top Bag has a pouch large enough to put, water bottles, extra masks or snorkels or ones camera. Leaving the inner space to solely accommodate your guide rope, no more searching for masks and snorkels after each dive.

The inner tube has been designed so it can be inflated without a pump, and a dump valve is also attached so one can squeeze out all the air so the tube is as flat as possible for better storage in ones bag.

Last but least a small loop is sewn inside so your rope can be attached securely to the Buoy, giving you the knowledge that rope will disappear into depths by accident.

Included:

Outer Cover, Inner Tube, Top Bag

Material:
Heavy duty 1000 denier PU coated Nylon

Weight:

900g
Freediving Buoy Dimensions:
Width: 75cm (widest), Height: 15cm

Top Bag Dimensions:

Length: 45cm, Width: 36cm

The 29/71 Freediving Buoy, designed around the travelling freediver. To go anywhere and in any bag, no matter if your walking to your dive site or packing to travel to the other side of the world. The 29/71 Freediving Buoy packs down so the outer-cover and inner-tube fully collapse and can be place into the top bag, weighing a total of 1kg.

Made from heavy duty 1000 denier PU coated Nylon fabric, which gives superior strength and durability from the day to day use of freediving. Whether you are training, teaching or the constant use in any freediving school.

Our Freediving Buoys are constructed using double and triple stitch methods to ensure the structural integrity of each seam, and most importantly where the guide line is connected to the Buoy. Each Buoy has a double D-Ring for your carabiner to attach, ensuring that the guide line is safe and secure. The inner space is large enough to easily hold 70m of rope, but thankfully with this Buoy the Top Bag has a pouch large enough to put, water bottles, extra masks or snorkels or ones camera. Leaving the inner space to solely accommodate your guide rope, no more searching for masks and snorkels after each dive.

The inner tube has been designed so it can be inflated without a pump, and a dump valve is also attached so one can squeeze out all the air so the tube is as flat as possible for better storage in ones bag.

Last but least a small loop is sewn inside so your rope can be attached securely to the Buoy, giving you the knowledge that rope will disappear into depths by accident.

Included:

Outer Cover, Inner Tube, Top Bag

Material:
Heavy duty 1000 denier PU coated Nylon

Weight:

900g
Freediving Buoy Dimensions:
Width: 75cm (widest), Height: 15cm

Top Bag Dimensions:

Length: 45cm, Width: 36cm

The 29/71 Freediving Buoy, designed around the travelling freediver. To go anywhere and in any bag, no matter if your walking to your dive site or packing to travel to the other side of the world. The 29/71 Freediving Buoy packs down so the outer-cover and inner-tube fully collapse and can be place into the top bag, weighing a total of 1kg.

Made from heavy duty 1000 denier PU coated Nylon fabric, which gives superior strength and durability from the day to day use of freediving. Whether you are training, teaching or the constant use in any freediving school.

Our Freediving Buoys are constructed using double and triple stitch methods to ensure the structural integrity of each seam, and most importantly where the guide line is connected to the Buoy. Each Buoy has a double D-Ring for your carabiner to attach, ensuring that the guide line is safe and secure. The inner space is large enough to easily hold 70m of rope, but thankfully with this Buoy the Top Bag has a pouch large enough to put, water bottles, extra masks or snorkels or ones camera. Leaving the inner space to solely accommodate your guide rope, no more searching for masks and snorkels after each dive.

The inner tube has been designed so it can be inflated without a pump, and a dump valve is also attached so one can squeeze out all the air so the tube is as flat as possible for better storage in ones bag.

Last but least a small loop is sewn inside so your rope can be attached securely to the Buoy, giving you the knowledge that rope will disappear into depths by accident.

Included:

Outer Cover, Inner Tube, Top Bag

Material:
Heavy duty 1000 denier PU coated Nylon

Weight:

900g
Freediving Buoy Dimensions:
Width: 75cm (widest), Height: 15cm

Top Bag Dimensions:

Length: 45cm, Width: 36cm

The 29/71 Freediving Buoy, designed around the travelling freediver. To go anywhere and in any bag, no matter if your walking to your dive site or packing to travel to the other side of the world. The 29/71 Freediving Buoy packs down so the outer-cover and inner-tube fully collapse and can be place into the top bag, weighing a total of 1kg.

Made from heavy duty 1000 denier PU coated Nylon fabric, which gives superior strength and durability from the day to day use of freediving. Whether you are training, teaching or the constant use in any freediving school.

Our Freediving Buoys are constructed using double and triple stitch methods to ensure the structural integrity of each seam, and most importantly where the guide line is connected to the Buoy. Each Buoy has a double D-Ring for your carabiner to attach, ensuring that the guide line is safe and secure. The inner space is large enough to easily hold 70m of rope, but thankfully with this Buoy the Top Bag has a pouch large enough to put, water bottles, extra masks or snorkels or ones camera. Leaving the inner space to solely accommodate your guide rope, no more searching for masks and snorkels after each dive.

The inner tube has been designed so it can be inflated without a pump, and a dump valve is also attached so one can squeeze out all the air so the tube is as flat as possible for better storage in ones bag.

Last but least a small loop is sewn inside so your rope can be attached securely to the Buoy, giving you the knowledge that rope will disappear into depths by accident.

Included:

Outer Cover, Inner Tube, Top Bag

Material:
Heavy duty 1000 denier PU coated Nylon

Weight:

900g
Freediving Buoy Dimensions:
Width: 75cm (widest), Height: 15cm

Top Bag Dimensions:

Length: 45cm, Width: 36cm

29/71 Depth Stopper, to help you mark the bottom point of your dive rope. Uniquely designed to clamp onto to your rope without the need of a knot like other brands, ensuring your rope is not damaged. This allows one to be able place the stopper exactly where you want it on your rope, and should you need readjust its position, it can easily be loosened and moved to your preferred spot on the rope.

Another advantage of the 29/71 Stopper is one does not need to feed the entire length of the rope to get to ones prefer position. Because the stopper is in two parts, it is merely a case of unclamping the two parts and removing it easily. It will take you the same total of time of 1 minute to put on or take off with the hex keys provided. If you should lose the hex keys, they can be found in any hardware store. No more costly tools needed should the situation arise to remove or put your stopper back on.

The stopper has a domed bottom so your lanyard does not get caught when you turn and ascend, and flat top for you carabiner to land perfectly when you reach the bottom of your rope.

29/71 Depth Stopper, to help you mark the bottom point of your dive rope. Uniquely designed to clamp onto to your rope without the need of a knot like other brands, ensuring your rope is not damaged. This allows one to be able place the stopper exactly where you want it on your rope, and should you need readjust its position, it can easily be loosened and moved to your preferred spot on the rope.

Another advantage of the 29/71 Stopper is one does not need to feed the entire length of the rope to get to ones prefer position. Because the stopper is in two parts, it is merely a case of unclamping the two parts and removing it easily. It will take you the same total of time of 1 minute to put on or take off with the hex keys provided. If you should lose the hex keys, they can be found in any hardware store. No more costly tools needed should the situation arise to remove or put your stopper back on.

The stopper has a domed bottom so your lanyard does not get caught when you turn and ascend, and flat top for you carabiner to land perfectly when you reach the bottom of your rope.